Model No.DCAM-01

Flood Barrier / Stop Log

＊Using Aluminum Alloy as main structure, stainless steel as accessories and EPDM

    Rubber as sealing

• ＊Can be deployed by a single individual in just 5~10 minutes
• ＊One single model fits all kinds of openings and locations
• ＊Elegant on the outside, firm on the inside
• ＊Lightweight and easy to operate

------------------------------------------------------------------------------------------------------------------------------

[ Threshold ] ．Material: 2 mm SUS 304 stainless steel ．Bear weight of more than 80 tons without     transformation.  ．Passed loading test conducted by MIRDC, Taiwan 　(Metal Industries Research & Development Centre)  ．Leveled with the ground after finishing the      installation which sand and water won’t be      accumulated, also decreases the possibility of      tripping hazard.

------------------------------------------------------------------------------------------------------------------------------

[ Anchoring Plate ] ．Material: Aluminum Alloy ．Fixed on the wall to connect the posts. [ Side Post ]                                 ．Ｍaterial: Aluminum Alloy (main structure)                      Stainless Steel (parts cast by molds)                      EPDM Rubber ． It can be applied to all kinds of openings by      different installation methods:      Between-wall / Face-wall / Between-Face wall /      Hidden (if the wall is thick enough)  ．With stainless steel tightening components to help force     the panels downward.  ．EPDM (Ethylene Propylene Diene Monomer) Rubber:       1. Widely used in car doors.     2. Bear high temperature up to 160℃ and resist acid or          alkali.     3. Weather resistant and can be used for more than 10         years.

------------------------------------------------------------------------------------------------------------------------------

[ Middle Post ]                                

．Ｍaterial: Aluminum Alloy (main structure)
                     Stainless Steel (parts cast by molds)
                     EPDM Rubber
．Basically the same as the main stanchion, only with tightening bar knobs at both sides.
．Required when the cover range needs to be widely extended.

------------------------------------------------------------------------------------------------------------------------------

[ Watertight Panel ]
．Material: Aluminum Alloy
     　            EPDM Rubber
．The surface of each panel is anodized.
．Each panel is 16 cm high and 3.5 cm thick. 
．Weight 2.785 per meter. 
．With 6 lateral layers to help resist current pressure.
．With EPDM rubber inserted into panels to ensure that it won’t drop off in the future.
．With plastic covers on both sides of panels to avoid bugs and cutting.  
．Tested by MIRDC (Metal Industries Research & Development Centre):
    Every 1600cm² can bear current pressure up to 1300kg. 

[ Tightening Lock ]

．Material: Stainless Steel 
．Put on the end post or middle post to tighten the panels downward. 
．Can be locked at the end of the assembly process to prevent the stealing of components.

------------------------------------------------------------------------------------------------------------------------------

[ Back Support ]

．Material: Aluminum Alloy 
           　      Stainless Steel
．Needed when the width of each segment

    exceeded certain distances.
．Adjust and fix it to tighten the panels

    and help support the flood panel to

    resist current pressure. 
．Passed loading test conducted by

    MIRDC (Metal Industries Research &

    Development Centre):
    A Span of 1 meter can bear more than 3700Kgf current pressure.
．With bases of back support and brace:
    1. Buried into the ground about 5 cm to resist current pressure.
    2. Leveled with the ground after the installation. 

------------------------------------------------------------------------------------------------------------------------------

Storage Rack

Material: Stainless Steel
Types: Horizontal, Vertical or Hidden

------------------------------------------------------------------------------------------------------------------------------

The product has passed international testing standards and is certificated by FM Approvals.
．Water lashes test for the flood panel: Apply the water level to a height of 70 cm and keep water from impacting the surface of the flood panel. The average speed of the flow shall be more than 1m/s.

．Wave test for the flood panel: Apply the water level to a height of 70 cm and keep waves impacting the surface of the flood panel. The height of the wave shall be about 10 cm high.

Obtained patents from America, China, Japan, Malaysia and Taiwan. The flood panel is easy to operate and can be deployed in 10 minutes by a single individual. The performance to stop flood is absolutely brilliant, and the system has already been sold to Australia, China, Japan, Indonesia, Philippines and Thailand.